A1 Equipment

LEVELLING & MEASURING INSTRUMENTS FOR SURVEYORS, CONSTRUCTION AND INDUSTRY

CALL US ON 01302 310099

DA220 1Watt Signal Generator

Signal Generator for use with Cable Avoidance Service Locators.

The DA220 1 Watt signal generator applies a distinct signal onto buried services, enabling them to be traced by a service locator tool.

Two modes of operation:

  • Induction Mode
  • Connection Mode

8 or 33kHz operation

Supplied with earth spike and cable kit

In stock

£495.00

In stock

Description

The DA220 Signal Transmitter applies a distinct signal onto buried services, enabling them to be traced and identified by a Cable Avoidance Tool Service Locator. The output signal from the transmitter can be applied to the service in two ways:

Induction Mode

The transmitter can apply an industry standard 8kHz or 33kHz signal to a service cable without the need to make a physical connection. An internal aerial transfers the signal to any conductive service in close proximity to the transmitter.

Connection Mode

This is the most efficient way of applying a signal to a conductive service, such as a cable or metal pipe. The signal frequency can be set to either 8kHz or 33kHz, which will be detected by the Leica DD120 cable avoidance tool and other most industry standard locators.

Additional information

Operating Transmission Frequences

8.192kHz, 32.768kHz, Mixed 8/33kHz

Output Power

4 levels

Induction Output Power

1W Maximum

Direct Connection Output Power

1W into 100 Ohms buried service impedance

Batteries

4 x 1.5V Type D

Battery Life (Typical use at 20°C)

30 hours (intermittent use)

Weight (including batteries)

2.4kg

Dimensions

180 x 260 x 280mm

IP Rating (Lid closed)

IP65

IP Rating (Lid open)

IP54