A1 Equipment

LEVELLING & MEASURING INSTRUMENTS FOR SURVEYORS, CONSTRUCTION AND INDUSTRY

CALL US ON 01302 310099

Leica LINO L2G

Superbright Green-Beam Line Laser Level

High quality self-levelling cross-line laser level suitable for interior contract work and mechanical services installation

  • Highly visible green vertical and horizontal line lasers
  • TWIST 250 Magnetic bracket
  • Adjustable Height UAL 130 Wall Mount
  • Magnetic ceiling target
  • Alkaline and rechargeable battery packs
  • Hard carrying case

 

Product No.864420

In stock

£299.00

In stock

Description

The new Leica LINO L2G is from the next generation of the well known and trusted LINO laser level range.

The L2G has two exceptionally bright green line-lasers for the very best line visibility.

High quality lasers and optics produce bright sharp laser lines right up to the maximum operating range.
A large glass window and the optimum laser emergence angle ensures outstanding laser visibility, and allows for perfect levelling and alignment at long distances.

The Leica Lino is self-levelling and automatically adjusts if it is slightly out of level (up to ± 4°). If the tilt is outside the ± 4° limit, the instrument activates a visual alert to prevent errors.

The LINO L2 may be used free standing, or mounted on the magnetic swivel bracket.

The level may also be set up on a small laser level tripod, or a standard survey tripod.
Rugged design mean that all Leica LINOs are dust and spray water protected, making them tough enough for today’s jobsite conditions.

Optional Laser receiver for outdoor operation.

When working outdoors, or in bright light, it can be difficult to see the laser line as the distance increases.

The new Leica Laser Receiver RGR 200 enable the laser line to be located at a range of up to 80 metres.

The laser receiver may be hand-held, and used to locate the laser line on a wall, floor or ceiling, or it can be attched to a measuring staff to check the height of the laser across an open area such as a new concrete floor.

Leica TWIST 250 Mounting Bracket and UAL 130 Wall Mount

The LINO L2G is simply attached to the TWIST 250 bracket by means of a strong magnet. The Leica TWIST 250 magnetic mounting bracket will attach magnetically to a steel channel or to the UAL 130 adjustable wall mount. The mount will clamp to ceiling edge trim, and the height of the laser can be finely adjusted with the thumb turn knob.

Additional information

Levelling Accuracy

± 0.2mm / m

Range

Up to 25m (dependent on ambient lighting level)

Range with Laser Receiver

80m

Horizontal Line Levelling Accuracy

0.3mm / m

Batteries

3 x 1.5V Type AA

Environmental Protection

IP54

Tripod Mounting Thread

1/4” (camera tripod) and 5/8” (survey tripod)

VIDEO

The New Leica Lino Series

 

The New Leica Lino Models

 

The Leica Lino Accessories